Set/Rotate Line
Use to move an internal line to match exactly to a point on another line. Once the line is moved, it can be pivoted to any angle. The second point selected may be on the same piece or a different piece.
To Set and Rotate a Line:
1. From the Modify Tab, Line Actions Group, select Set/Rotate.
2. Select match point on line to set (line to move).
3. Select match point on target line (stationary line).
4. Pivot the line by cursor or value mode:
• Cursor Mode – left click to place the line.
• Value Mode – click both buttons and release. Enter the angle to rotate the line in the Ang field.